The iSpaniel tracking solution requires that you apply an iSpaniel tag to each asset that you wish to track.  This article describes how to apply the tags in the best way so they remain in place.


Instructions

  1. Tags should be applied at 10 o'clock or 2 o'clock where the keystone is at 6 o'clock.
  2. For used assets is is advised that the area is rubbed with an abrasive pad to remove any dirt and create a key for the glue to adhere to.  This may not be necessary for new kegs and casks, but is advised to provide a key for adhesion.
  3. Then, clean the area with heavy duty wipes to remove any dirt and oil, and then dry the area.
  4. Remove the backing from the adhesive area.
  5. Press the tag firmly into the desired location on the barrel.
  6. The tag will have fully bonded in 4 hours so avoid any rough treatment or extreme heat, and keep dry.  In cold environments, the glue will take longer to set and it is advised to leave for 24 hours.
  7. If the tag needs to be removed, this can be done using a chisel or heavy duty palette knife.